The Fluke TP1000 test probe is a key accessory for Fluke solar system analyzers (SMFT-1000).
This probe facilitates the measurement of voltage and electrical signals from a solar module or array and, equipped with a remote test button, allows users to control the testing process hands-free or from a distance.
In the design of the TP1000, safety is a priority: with a protective cap, a safety rating of CAT IV 600 V and CAT III 1000 V is guaranteed, and without the cap, it has a rating of CAT II 1000 V.
This probe is offered with an ergonomic design, lightweight, and compact dimensions to facilitate transportation and use in field installation environments.
🔹 Key Features of Fluke TP1000
-
Remote button for test control without the need for direct contact.
-
Full compatibility with the SMFT-1000 tester.
-
Safety rating: CAT IV 600 V / CAT III 1000 V (with cap) and CAT II 1000 V (without cap).
-
Current carrying capacity up to 10 Amperes.
-
Lightweight and compact design.
-
Stress-resistant connections.
-
Suitable for testing voltage of PV modules or arrays under operational conditions.
🔹 Technical Specifications of Fluke TP1000
| Feature | Value |
|---|---|
| Safety Rating | With cap: CAT IV 600 V / CAT III 1000 V; Without cap: CAT II 1000 V |
| Maximum Current | 10 A |
| Operating Temperature | −20 °C to +55 °C |
| Dimensions | Rectangular with an approximate length of 29.6 inches and a width of ≈ 9.6 inches (751.8 × 243.8 mm) |
| Weight | ≈ 45.4 grams (0.1 lbs) |
| Safety Standard | IEC 61010-031 |
❓ Frequently Asked Questions (FAQ)
Is the TP1000 specific for solar systems?
Yes, its design and support are specifically tailored for PV systems and the SMFT-1000 device.
Why does it have a remote button?
For better control of the testing process without the need for direct contact with the probe in challenging conditions or from a distance.
What safety rating does it operate within?
With the protective cap: CAT IV 600 V / CAT III 1000 V; without the cap: CAT II 1000 V.
Does it require special care?
Yes, the probe should be used in appropriate conditions, the protective cap should be installed when used in high-voltage environments, and insulation and housing conditions should be checked before use. media.fluke.com+1
🔚 Conclusion
The Fluke TP1000 probe is an excellent option to complement PV testing equipment. With the remote button capability, high safety rating, and lightweight design, this probe helps electrical engineers conduct tests with greater accuracy and safety.
If you are using the SMFT-1000, the TP1000 is a must-have for your toolset.
📎 Official Datasheet Link
👉 Download the Fluke TP1000 datasheet (PDF).
