When dealing with several thousand amperes of current, rigid clamps become practically unusable due to their weight and large dimensions. This is precisely where the Fluke i6000s flex-24 comes into play.
This product falls under the advanced category of digital multimeter accessories and utilizes a flexible magnetic coil instead of a heavy iron core, which means there is no magnetic saturation; thus, measurement accuracy remains constant at both 60 amperes and 6000 amperes!
This model offers three selectable ranges (60A, 600A, 6000A), providing exceptional flexibility for the user. Thanks to the CAT III 600V standard, user safety is ensured while working with low and medium voltage panels.
Additionally, the control unit of this device incorporates noise-reduction filters to ensure that the waveform displayed on the oscilloscope is clear and free from interference. With the i6000s, accessing the most challenging points in substations will no longer be a challenge for measurement.
Features and Benefits of Fluke i6000s flex-24
- Wide AC current measurement range up to 6000 amperes in three different ranges
- 24-inch (610 millimeter) coil length for wrapping around the largest conductors
- Rogowski Coil technology without a metal core (very lightweight and no saturation)
- Voltage output with BNC connector (connectable to oscilloscope and multimeter with adapter)
- Very easy installation around cables with the “Twist-to-Lock” mechanism
- Very high resistance to vibrations and electromagnetic interference (EMI)
Technical Specifications
| Feature | Value / Description |
|---|---|
| Current Ranges | 60A / 600A / 6000A AC |
| Output Sensitivity | 10 / 1 / 0.1 mV per Amp |
| Basic Accuracy | ±1% of range |
| Flexible Probe Length | 610mm (24 inches) |
| Coil Diameter | 14.3mm (0.56 inch) |
| Power Supply | 2 AA batteries (approximately 400 hours lifespan) |
| Safety Standard | CAT III 600V |
Frequently Asked Questions about Fluke i6000s flex-24
Does this clamp measure DC current as well?
No, Flex series probes operate based on electromagnetic induction (Faraday’s law) and are designed solely for alternating current (AC).
What is the difference between the flex-24 and flex-36 models?
The only difference is the coil length. The flex-24 model has a length of 61 centimeters, while the flex-36 model has a length of 91 centimeters, used for much larger conductors.
Is an additional component needed to connect to a digital multimeter?
Yes, since the output of this device is BNC, a BNC-to-Banana adapter is required to connect to the banana jacks of the multimeter.
Conclusion
The Fluke i6000s flex-24 is perfect for those dealing with “wild currents”! This flexible probe eliminates the physical limitations of traditional clamps and accurately transmits the waveforms of heavy currents to your display device. A strategic choice for your marketplace in the heavy industries.
