In advanced troubleshooting, sometimes the number displayed on the multimeter does not tell the whole story; you need to see how the current behaves at any moment.
The Fluke i30s, which falls under the category of Digital Multimeters and visual analysis tools, provides this capability with laboratory-grade accuracy.
This probe is equipped with a BNC connector instead of conventional banana plugs, allowing direct connection to the oscilloscope input.
The Hall Effect technology in the i30s allows you to identify both direct current (DC) and alternating current (AC) with a broad frequency response of up to 20 kHz. This feature is crucial for examining power supply noise, leakage currents, and high-frequency ripples.
Additionally, the presence of a zero adjustment screw enables the operator to completely neutralize the effect of any residual magnetism before measuring DC.
With its ergonomic design and CAT III 300V safety rating, this product has become a standard in electronics laboratory benches and industrial control panels.
Features and Benefits of Fluke i30s AC/DC Current Clamp
- Accurate measurement of AC and DC currents up to 30A without circuit interruption
- Equipped with BNC connector for direct connection to oscilloscopes and ScopeMeter
- Hall Effect technology for precise display of complex current waveforms
- Wide frequency response from DC to 20kHz for harmonic and transient analysis
- Includes zero screw for precise zero point adjustment in DC measurements
- Small clamp jaw size for access to very tight spaces and delicate wiring
Technical Specifications
| Feature | Value / Description |
|---|---|
| Current Range | 30mA to 30A AC/DC |
| Output Signal | 100mV per Ampere |
| Connection Type | BNC Connector |
| Frequency Response | DC to 20 kHz (-3 dB) |
| Max Conductor Diameter | 19mm (0.75 inch) |
| Safety Standard | CAT III 300V |
| Power Source | 9V Battery (approximately 30-hour lifespan) |
Frequently Asked Questions about Fluke i30s AC/DC Current Clamp
What is the main difference between i30 and i30s?
The i30 model has a banana plug for multimeters, while the i30s comes with a BNC plug for connection to oscilloscopes to display the waveform.
Can the i30s be connected to a regular multimeter?
Yes, by using a BNC to banana adapter (available separately), you can use this probe on a multimeter as well.
Why is a battery required for this model?
Hall effect sensors require an active power source to detect the DC magnetic field and amplify the output signal.
Summary
The Fluke i30s is your eye into the world of low currents.
If you are looking for precise harmonic analysis and real-time current behavior observation in sensitive systems, this BNC probe from Fluke, with its remarkable accuracy, is the most professional choice for you.
