When it comes to over 3000 amp currents in industrial busbars, not every clamp can withstand the strain; however, Fluke i3000s is built for tough conditions.
This product falls under the category of Digital Multimeter accessories and imaging test equipment, equipped with a very large opening to easily clamp around thick cables and wide busbars.
This clamp features three selectable ranges (30A, 300A, 3000A) that allow technicians to monitor both small leakage currents and the full load currents of a system with a single tool.
The output of this device is in AC voltage transmitted through a BNC interface; this means you can view current harmonics and noises in complete detail on an oscilloscope.
Additionally, by using the Dual Banana adapter (usually included with the device), this heavy-duty clamp can be connected to a regular multimeter to elevate your measurement capabilities to the level required for power plant projects.
Features and Benefits of the Fluke i3000s AC Current Clamp
- Measurement capability of AC currents up to 3000A across three accurate ranges
- Large jaw opening with a diameter of 64mm for encompassing hefty conductors
- Voltage output with BNC interface for displaying waveforms on an oscilloscope
- No need for batteries (Passive Sensor) to ensure constant operation
- Shock-resistant design suitable for harsh industrial environments
- High accuracy at low and mid frequencies (10Hz to 100kHz)
Technical Specifications
| Feature | Value / Description |
|---|---|
| Current Ranges | 30A / 300A / 3000A AC |
| Output Signal | 10 / 1 / 0.1 mV per Amp |
| Maximum Wire Diameter | 64mm (2.52 inch) |
| Connection Type | BNC (with banana adapter) |
| Safety Standard | CAT III 600V |
| Basic Accuracy | ±2% of range (45Hz to 65Hz) |
Frequently Asked Questions about the Fluke i3000s AC Current Clamp
Can the i3000s measure DC currents as well?
No, this model operates based on electromagnetic induction and is designed only for measuring alternating currents (AC).
What is the difference between i3000s and the Flex series?
The Flex series is flexible and suitable for very tight spaces, whereas the i3000s has a solid and rigid jaw that offers greater stability for quick and repeated measurements in distribution panels.
Do I need an additional part to use it with a regular multimeter?
No, this device usually comes with a BNC to banana adapter that easily connects to standard multimeter inputs.
Conclusion
Fluke i3000s is the ultimate choice for power engineers and industrial contractors.
If your projects involve high-current transformers and main distribution panels, this 3000-amp Fluke clamp will maintain your accuracy and safety at the highest possible level.
