In industrial electrical troubleshooting projects, there are times when we need a tool that is not only accurate but can also fit into the most cramped corners of electrical panels; Fluke has designed the model i200 specifically for this purpose.
This product, categorized under digital multimeter accessories, is an AC current clamp that transmits current at a ratio of 1000:1 (1mA output for every 1A of current passing through) to your multimeter.
The rugged body and optimized jaws of this model allow you to easily cover conductors with a maximum diameter of 20 millimeters.
One of the outstanding features of the i200 is its high safety regulated by the CAT III 600V standard, which provides peace of mind for technicians when working with power circuits. This clamp is always ready for use due to its lack of a battery (Passive Sensor) and, unlike DC models, there will be no concern about running out of charge for the Hall Effect sensor.
Features and Benefits of Fluke i200 AC Current Clamp
- Precise measurement of AC current in the range of 1A to 200A
- 1mA/A current output for complete compatibility with multimeter current inputs
- Extremely compact dimensions for accessing blind spots in electrical panels
- No battery required (powered through electromagnetic induction)
- Output cable with reinforced and safe banana plugs
- CAT III 600V safety standard for use in industrial environments
Technical Specifications
| Specification | Value / Description |
|---|---|
| Type of Current | AC Current Only |
| Measurement Range | 1A to 200A |
| Output Ratio | 1mA per Ampere |
| Maximum Cable Diameter | 20mm (0.8 inch) |
| Response Frequency | 40Hz to 10kHz |
| Safety Standard | CAT III 600V |
Frequently Asked Questions about Fluke i200 AC Current Clamp
Does the Fluke i200 measure DC current as well?
No, this model is designed based on a current transformer (CT) and is only applicable for measuring alternating currents (AC).
Does the multimeter need to be set to a specific setting to use this clamp?
Yes, since the output of this clamp is “current,” the probes must be connected to the mA input terminal of the multimeter, and the selector should be set to the mA AC mode.
What is the difference between the i200 and the i200s model?
The i200 model has a “current” (mA) output and connects to the current input of the multimeter, whereas the i200s model has a “voltage” (mV) output and is typically used for oscilloscopes.
Conclusion
The Fluke i200 is a cost-effective and exceptionally high-quality solution for those seeking Fluke accuracy in measuring AC currents up to 200 amperes. Its ease of use and maintenance-free operation make this clamp a perpetual choice for the toolkits of electrical engineers.
